Router 1
- Connect to CLI
- type enable
- config terminal
- interface serial 1/0 (or your preferred port)
- ip address 192.168.2.254 255.255.255.0 (of the connecting network/router)
- clock rate 64000
- no shutdown
Router 2
- Connect to CLI
- type enable
- config terminal
- interface serial 1/0 (or your preferred port)
- ip address 192.168.2.253 255.255.255.0 (of the connecting network/router)
- no shutdown
This is such a great resource that you are providing and you give it away for free. I love seeing blog that understand the value. Im glad to have found this post as its such an interesting one! I am always on the lookout for quality posts and articles so i suppose im lucky to have found this! I hope you will be adding more in the future... Tp link tl wr 940n vs tp link archer c20 router details
ReplyDelete