Wednesday, 25 May 2016

Connect two cisco routers using serial port

Router 1
- Connect to CLI
- type enable
- config terminal
- interface serial 1/0 (or your preferred port)
- ip address 192.168.2.254 255.255.255.0 (of the connecting network/router)
- clock rate 64000
- no shutdown

Router 2
- Connect to CLI
- type enable
- config terminal
- interface serial 1/0 (or your preferred port)
- ip address 192.168.2.253 255.255.255.0 (of the connecting network/router)
- no shutdown

No comments:

Post a Comment